360702_New Arrival Silver Pendant 40%OFF!
Powered by Blogger.

Sponsored

Showing posts with label pc tricks. Show all posts
Showing posts with label pc tricks. Show all posts

How to Remove Virus Manually in Windows

Written By DDM on Wednesday, November 2, 2011 | 5:09 AM

This is the trick i have been searching for days.because my antivirus has stopped its job and he's in strike.He challenged me to remove some malwares in my pc without the help of him.So i decided to search for the post in web.At last i got it and happy to share with you.

Start->Run->type cmd



in each drive type attrib /s /d it will display the list of all files in that drive along with folders.concentrate on files having SHR attribute.normally virus files have two characteristics

1.SHR attribute

2.Queer name like amvo.exe,r6r.exe,autorun.inf etc.



Note:some system files also have this attribute like MS DOS.SYS,IO.SYS etc so before deleting googling about that file will help.



to delete these files type c:\>del /f /s /a



>> to view the content of files with .inf,.vbs,.c etc i.e files which r not batch files or executables.goto explorer n then goto the required drive or folder n type the filename with extension it wil open up in notepad.



>>there is another method also.goto the required location n type attrib -s -h -r filename

then use gui to see that hiiden file.if it is not n exe or .bat or then open it with notepad.Here you will get some information like a file name or a registry key which the virus affects or a startup item or process.Change this or un check the start up.



if file is not deleted like it says access denied it means it already used by some process.open task manager n find a process of the same name or some process which is not a valid windows process(better google) n end that process.



if not found open msconfig goto statr up tab n look at if a startup items seems queer(u wil have this feeling if u r n experienced windows user otherwise all da startup items may seem queer.)uncheck that.u may also learn about the start up item by googling.after un checking restart the computer then restart the computer.



This method is effective in removing some spywares or some small but annoying virii like maskrider etc. which r sometimes not detected by antivirus softwares.


source is some website and not at all completely written by me.



5:09 AM | 0 comments | Read More

How to Reset / Remove / Bypass BIOS or CMOS Password

Written By DDM on Monday, October 24, 2011 | 5:15 AM




TUTORIAL

Here is the ultimate solution for your long time problem.

Actually what is bios password?
BIOS stands for basic input output system.bios passwords are additional security settings to prevent unauthorized access to your computer.

So why it is for?
BIOS passwords are used to add some extra security to computers. You can either set a password to prevent access to BIOS settings or to prevent PC from booting.




why we have to recover it? 
sometimes this extra security might become a pain when you forget the BIOS password or someone changes your system BIOS password intentionally.

how to recover it? 
There are many known ways to reset / remove / bypass the password:

By removing the CMOS battery
By using the motherboard jumper
By using MS DOS command
By using software
By using Backdoor BIOS password 


VARIOUS METHODS




A. By Removing the CMOS Battery:

Almost all motherboards use a small coin sized CMOS battery to store all BIOS settings along with the password. To reset the password, unplug the PC, open the cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it back. It'll reset all BIOS settings as well as the password and you'll need to re-enter all settings.

If it fails, then try to remove the battery for at least one hour.








B.By Using the Motherboard Jumper:
In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.

Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.

When you find the jumper, look carefully.  There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.

Make sure to turn the PC off before opening the cabinet and resetting the jumper











C. By Using MS DOS Command:
This method works only if you have access to the system when its turned on because this method requires MS DOS. Open MS DOS from programs menu and provide following commands one bye one:

debug
o 70 2E
o 71 FF
quit

NOTE: The first character in the above commands is "O" and not the number 0.

After providing the above commands, restart your system and it should reset the CMOS Settings along with the BIOS password.

If you are curious to know how it works? then let me explain the above commands:

In this method we are using the Debug tool of MS DOS. The "O" character present at first in these commands, outputs the values to IO ports. The number 70 and 71 are port numbers which are used to access CMOS memory. By providing FF value we are telling CMOS that there is an invalid checksum and it resets the CMOS settings as well as BIOS password.





There are a few software which can also reset CMOS settings or BIOS password or both within a few clicks. But as stated above you should have access to a system which is turned on and should have access to MS DOS or MS Windows:

1-KillCMOS
KillCMOS basically "resets" your computer's CMOS settings to the factory defaults. Works with ALL CMOS. KiLLCMOS only changes checksums & values that makes the motherboard CMOS revert back to factory defaults.
download link-http://www.majorgeeks.com/download2969.html

2-!BIOS-!Bios is a tool originally developed for a brute, blunt removal of passwords from BIOSes. Through it’s development it has been severly extended, and Eleventh Alliance have now recieved emails from computer support divisions, hackers and not least of all ordinary computer users who has expressed gratitude for what they consider one of the best toolkits available.Features:

!Bios can decrypt the passwords used in some most common BIOS (including various bioses/versions by IBM, American Megatrends Inc, Award and Phoenix).
!Bios can also save and restore the IBM standard CMOS/NVRAM memory where almost all common Bioses store the BIOS setup settings.
!Bios can save the part of the RAM dedicated for the BIOS (which has security implications in some BIOSes as encryption algorithms and/or password may actually reside here in some badly coded BIOSes).
!Bios can do crude, brutal attacks (”blasters”) which removes password from a lot of Bioses. A bit dangerous though, can give unexpected and unwanted results.
!Bios has a CMOS editor where you through a interface with similarities to several hex-editors can modify the CMOS/NVRAM memory in binary, decimal and hexadecimal ways. (only adviced for very experienced hackers)
!Bios has a command line interface (CLI) and a very simple VGA-text interface, GUI. If no parameters is passed to !Bios, it starts the easy-to-use GUI, otherwise it starts the GUI.
!Bios has built-in support pages which provides several tricks and tips, notes about known backdoors etc.
download link-http://www.11a.nu/wp-content/uploads/2006/03/BIOS320.EXE


3-CmosPwd-

CmosPwd decrypts password stored in cmos used to access BIOS SETUP.
Works with the following BIOSes

ACER/IBM BIOS
AMI BIOS
AMI WinBIOS 2.5
Award 4.5x/4.6x/6.0
Compaq (1992)
Compaq (New version)
IBM (PS/2, Activa, Thinkpad)
Packard Bell
Phoenix 1.00.09.AC0 (1994), a486 1.03, 1.04, 1.10 A03, 4.05 rev 1.02.943, 4.06 rev 1.13.1107
Phoenix 4 release 6 (User)
Gateway Solo - Phoenix 4.0 release 6
Toshiba
Zenith AMI
With CmosPwd, you can also backup, restore and erase/kill cmos.

download link-http://www.cgsecurity.org/cmospwd-5.0.zip








Some BIOS manufacturer put a backdoor password in BIOS which always works irrespective of what password you have set in BIOS. Its a master password which is used for testing and troubleshooting purposes.

AMI BIOS Passwords:


A.M.I.
AAAMMMIII
AMI?SW
AMI_SW
AMI
BIOS
CONDO
HEWITT RAND
LKWPETER
MI
Oder
PASSWORD

AWARD BIOS Passwords:

01322222
589589
589721
595595
598598
ALFAROME
ALLy
aLLy
aLLY
ALLY
aPAf
_award
award
AWARD_SW
AWARD?SW
AWARD SW
AWARD PW
AWKWARD
awkward
BIOSTAR
CONCAT
CONDO
Condo
d8on
djonet
HLT
J64
J256
J262
j332
j322
KDD
Lkwpeter
LKWPETER
PINT
pint
SER
SKY_FOX
SYXZ
syxz
shift + syxz
TTPTHA
ZAAADA
ZBAAACA
ZJAAADC
%øåñòü ïpîáåëîâ%
%äåâÿòü ïpîáåëîâ%

PHOENIX BIOS Passwords:

BIOS
CMOS
phoenix
PHOENIX

Misc Common Passwords:
ALFAROME
BIOSTAR
biostar
biosstar
CMOS
cmos
LKWPETER
lkwpeter
setup
SETUP
Syxz
Wodj

Other Manufacturer BIOS Passwords:

Biostar - Biostar
Compaq - Compaq
Dell - Dell
Enox - xo11nE
Epox - central
Freetech - Posterie
IWill - iwill
Jetway - spooml
Packard Bell - bell9
QDI - QDI
Siemens - SKY_FOX
TMC - BIGO
Toshiba - Toshiba
VOBIS &  IBM - merlin

NOTE: All these passwords are case-sensitive and are changed from time to time by manufacturers.

some useful tips-
1-Depending on the manufacturer of your motherboard, you may be able to use what it is called a "backdoor password" to bypass the password problem. 2-Try looking at the external links for possible passwords.
3-Remember that passwords are Case Sensitive. The last two passwords in the AWARD BIOS list are in Russian.
4-Sometimes the bios reset jumper has a "handle" and is colored a bright color to make it easy to locate. Also, look in your case near the bottom. If it is a manufactured computer then it probably came with a little sticker with the jumpers and the location of the reset jumper.

5-In rare cases, the battery may be soldered into the motherboard and very difficult to remove. If this is true, you may need to find a jumper near the battery that achieves the same result. If you don't know which jumper it is, you CAN test them all. Unplug (really unplug, not just power off) the computer, and start a methodical change in all the jumpers positions, change one, count to ten, change it back, move on the next. After completing the lot of them (on older motherboards this could take a while) plug the PS back in, and boot up. You may risk damaging your computer with this procedure if you are not careful.
6-Some notebooks such as IBM's ThinkPad render useless when the BIOS password is being tried to reset.
7-Don't just start pulling jumpers on the motherboard. Make sure you know where it was and in what position in case anything goes wrong put it back.
8-If you turn your computer on and it makes strange noises / beeps, you should contact the vendor, manufacture, or a tech guy to fix it.



5:15 AM | 0 comments | Read More

How to install win 7 from a usb

Written By DDM on Sunday, October 23, 2011 | 4:25 AM




This is a tutorial about how to install windows 7 from a usb drive.This tut seems to be easy when compared to other posts in internet.I'm writing this in simple language.
ALL YOU NEED IS
1.Thumb drive having 4 GB of capacity.
2. Win 7 dvd




PROCEDURE
Step-1: Plug-in your USB flash drive and backup all the
existing data in it.
Step-2: Open the command prompt. If you are using
Windows 7/Vista then open it with administrator rights*.
* Goto Start -> All Programs -> Accessories -> Right-click on
“Command Prompt” and select “Run as Administrator”.
Step 3: In the command prompt, type in the following
command:
DISKPART
This will start the Microsoft DiskPart utility.
Now issue the following command:
LIST DISK
This will show you a list of  available disks on your system.
Disk 0 is usually the hard disk. In my case, Disk 5 is the USB
drive (this can be a different one in your case). Now issue the
command as shown below:
SELECT DISK 5
NOTE: In the above command, 5 is the USB drive number on
my system. If you have a different number on your system,
then you need to replace 5 with that number.
Step-4: Now issue the following list of commands one by one
as shown below:
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS QUICK
ASSIGN
EXIT

Minimize the command prompt and proceed to the next step.
Step 5: Insert the Windows 7/Vista installation disc and note
down the “drive letter” of your DVD drive. In my case, it is
“H:”. Now type the following list of commands as shown
below:
H: CD BOOT
CD BOOT
BOOTSECT.EXE /NT60 M:(NOTE: M: is your USB drive letter)
EXIT

Step-6: Copy the contents of your Windows 7/
Vista installation disk into the USB flash drive.
That’s it! Your USB stick is now ready to boot and install the
OS for you. Don’t forget to enable the “USB Boot” option and
change the “boot priority to USB device from hard disk” in
your BIOS settings.
THANK YOU



4:25 AM | 0 comments | Read More

changing any user password without knowing real password

Written By DDM on Tuesday, October 18, 2011 | 7:05 PM




This is  old trick but may helpful to you who forgot the original password

This tweak gives a user the opportunity to use it for good or bad. It enables the user to re-password any account without having to know the existing password and also shows you every account that exists on the machine (even the ones that are hidden). This is a good tool to use if you forgot a password to say your administrator account and you needed to be logged into the admin account for any reason. 



To view all of the user accounts:
1) While logged onto the computer, click on Start>Run>and type in CMD.

2) From the command prompt window, type in net users. This will show you every account that is made onto the computer whether it is hidden or not.
-----------------------------------------------------------------
To change an account password:
1) While logged onto the computer to an account that has administrative rights, click on Start>Run>and type in CMD.

2) Type in net user then the name of the account then * and press enter. heres an example: net user administrator * or net user "Joe Smith" * . Put the name in quotes if it contains spaces.

3) From there it should ask for a new password. Type in your new password (type very carefully - the command window won't display what you type) and once more to confirm it. If you get the message that the command succeeded successfully you're all set!!



7:05 PM | 0 comments | Read More
Related Posts Plugin for WordPress, Blogger...